Jiangsu Sunrain Solar Energy Co., Ltd.
- Heat Pipe Solar Collector
1. Evacuated tube collector, a part of solar hot water heater, is usually mounted on a roof and has a row of glass tubes.
2. A copper heat pipe, which is hollow with the space inside evacuated, is installed within the tube
- U Pipe Solar Collector
1. In recent years, U pipe solar collectors are used increasingly for domestic hot water heating.
2. The vacuum tubes absorb the solar energy and transfer it into heat energy, and then pass it to the U pipe to ...
- Flat Plate Solar Collector
A glazed flat-plate solar collector, a main part of solar water heator, is composed of a shallow rectangular box with a flat black plate behind a tempered glass cover
- DMG Evacuated Tube Collector
1. High heat efficiency, long service life
2. Small heat capacitance, quick startup (within two minutes)
3. High smolder temperature ...
- Direct Flow Evacuated Tube Collector
1. High pressure resistance (up to 1.0 Mpa)
2. Quick starting at lower temperature
3. Combine with existing energy source for home, swimming pool heating etc...
- Solar Hot Water Storage Tank
1. An efficient, easy to install solar hot water tank is an integral part of all solar hot water heaters.
2. The upright tank, which can heat the top water instantly, is able to keep the water temperature at different level....
- Pre-heated Solar Water Heater
1. Cold water can be rapidly heated
2. Adopting direct exchanging heat mode, this solar hot water heater can offer enough hot water for you...
- One Pipe Inlet-outlet Solar Water Heater
1. This kind of solar hot water heater relies on the natural circulation of water between the collector and the tank.
2. Water in the evacuated tubes is heated and rises .
- Two pipe Inlet-outlet Solar Water Heater
1. The Two pipe inlet-outlet non-pressure solar hot water heater relies on the natural circulation of water between the collector and the tank, with auto water feeding...
- Solar Collector Module
1. Be widely applied in hotels, schools or some large projects.
2. More economical and efficient
3. Successfully carry out the installation of separation...
- Solar Heating System
1. Inner tank: stainless steel SUS304-0.5mm
2. Outer tank: painted steel-0.4mm
3. Collector angle: 30 degree...
- Demo System
Vacuum tube size: Ф58ⅹ600mm
Tube amount: 4 pieces/set...
- Display Controller
Working voltage: 4.5V DC
Working environment temperature: -10℃˜40℃
- Pump Station (110V / 220V)
Type: TYY/SS-П(CE certification)
Exterior size: 450ⅹ260ⅹ190mm
Full power of recycle pump: AC 110V/220V, 100W
- Circulator Pump
Rated working voltage: 110V/220V
Maximum output power: 93W
Pump lift: 6M
Technical Parameters of T/P Relief Valve
Inlet: 1/2 in tapered male thread
Outlet: 1/2 in parallel female
- Solar Evacuated Glass Tube
A evacuated tube or vacuum tube, known as a main component of evacuated tube solar collector, is mainly made of double-walled glass, namely inner tube, outer tube...